The short answer: “fiber optic cable” covers three different products, so pick by what you are connecting. An optical Toslink cable carries digital audio between a TV, console or player and a soundbar or receiver. A fiber HDMI cable carries video and audio between a source and a display. An LC patch cable links network equipment such as switches and transceivers. They are not interchangeable. The three PrimeCables options here run from $4.46 to $62.99 as of November 17, 2026, both sale prices that the pages say end November 24, 2026.
This guide matches our Toslink Digital Optical Audio Cable, HDMI 2.0 Cables (4K) and Fiber Optic Cables categories. For the HDMI side of the story, read What HDMI Cable Do You Need for 4K 120Hz and 8K; for copper network cable, see Cat6 vs Cat6a vs Cat8.
Three kinds of fiber cable
1. Toslink (optical audio)
Toslink, also called optical S/PDIF, carries digital audio only. The product page describes it as a way to distribute high-definition, multi-channel audio without common electrical problems such as ground loops or RF and EM interference. Look for a Toslink or “optical” output on your TV or console and a matching input on your soundbar or receiver. There is no video on this cable.
2. Fiber HDMI (active optical cable)
This is an HDMI cable with fiber inside, used to carry video and audio from a source to a display. The page describes it as having both copper and fiber conductors. Look at the HDMI version and the length on the page, and remember that both ends must be HDMI ports.
3. LC fiber patch cable (network)
An LC patch cable connects network equipment, usually a switch, a router or a server with fiber ports and SFP transceivers. Check three things on the page: the fiber type (multimode OM3 here), the connector (LC/UPC duplex) and the length. The fiber type should match your transceivers.
Which one do you need?
- Soundbar or receiver is not getting digital audio: Toslink.
- A TV or projector far from the source over HDMI: a fiber HDMI cable.
- Linking two network devices with fiber ports: an LC patch cable.
Three fiber cables from PrimeCables
Optical Toslink 5.0mm OD Audio Cable (6 lengths available) – PrimeCables
The cable for a TV-to-soundbar connection. It has a full-sized male Toslink connector at each end, molded strain-relief boots, a gold-plated ferrule and precision polished fiber tips, with plastic tip protectors on each end. The outside diameter is 5.0 mm. Prices as of November 17, 2026: 1.5 ft $5.69 and 15 ft $8.59. The page also lists 6 ft $7.49, 10 ft $7.99 and 25 ft $12.09.
High Speed HDMI 2.0 Fiber Active Optical Cable – PrimeCables (75 ft)
For a long HDMI run to a display or projector. The page lists HDMI 2.0, 18 Gbps bandwidth, 4K at 60 Hz with HDR and Dolby Vision, 4:4:4 chroma sampling and audio with ARC, plus an Ethernet channel. It lists a 30 AWG wire gauge, a 4.8 mm cable diameter, gold connector plating and a limited lifetime warranty. The page says it needs no external power supply. The 75 ft length is on sale for $62.99 (regular $69.99) as of November 17, 2026; the page says the sale ends November 24, 2026.
Multimode OM3 Fiber Patch Cable, LC/LC UPC, Duplex, LSZH Jacket 3mm, Aqua – PrimeCables
For connecting network gear with LC ports. The page lists a 50/125 µm multimode OM3 fiber, duplex LC/UPC connectors at both ends, a 3 mm aqua LSZH (low smoke zero halogen) jacket, insertion loss of 0.2 dB or less and 10 GbE+ performance. Sale prices as of November 17, 2026: 0.5 m $4.46 (regular $5.95) and 5 m $7.96 (regular $9.95); the page says the sale ends November 24, 2026.
Quick comparison
| Cable | Carries | Connectors | Price (Nov 17, 2026) |
|---|---|---|---|
| Optical Toslink 5.0mm OD | Digital audio only | Toslink male, both ends | $5.69 (1.5 ft), $8.59 (15 ft) |
| HDMI 2.0 Fiber Active Optical, 75 ft | Video and audio (HDMI 2.0, 18 Gbps) | HDMI | $62.99 (sale, regular $69.99, ends Nov 24, 2026) |
| Multimode OM3 LC/LC patch | Network data | Duplex LC/UPC, both ends | $4.46 (0.5 m, sale, regular $5.95), $7.96 (5 m, sale, regular $9.95); ends Nov 24, 2026 |
FAQ
Is a Toslink cable the same as an HDMI fiber cable?
No. Toslink carries digital audio only and uses Toslink connectors. A fiber HDMI cable carries video and audio and uses HDMI connectors.
Can I use an LC fiber patch cable for my TV or soundbar?
No. LC patch cables connect network equipment with LC fiber ports. They do not plug into Toslink or HDMI ports.
Which cable do I need to connect my TV to a soundbar?
Check which ports both devices have. If both have an optical (Toslink) port, use a Toslink cable. If your TV has HDMI ARC, the soundbar’s manual will say whether to use it instead.
What does OM3 mean on a fiber patch cable?
On our page, OM3 is a grade of multimode fiber. Our page lists it as 50/125 µm, meaning a 50 µm core inside 125 µm cladding, rated for up to 10 GbE+. Match the fiber type to your transceivers or equipment before you order.
See the full range in our Fiber Optic Cables and Toslink categories.
Prices as of November 17, 2026. Check each product page for the current price, availability and specifications.

