So you got some speaker wire for a home theater system you want to lay down. It’s not hard to lay down speaker wire but how to run wire down successfully through a room without having it outright noticeable is where a lot of debate can happen.
There are ultimately three basic ways to run speaker wire for a speaker system in a home. Homeowners either choose one or a combination to get the job done. There’s running the wires along baseboards and baseboard moulding, there’s running wires using crown moulding, and there’s also running your wires using crawlspace or attic access.
The simplest way to install speaker wire is to use the baseboards. If you have a carpeted room, choose this. Carpets are typically laid down using tack strips a half-inch from the wall. This gives you a built-in channel to use. Just be careful, when laying the carpet back down after you’ve installed the wiring, to not puncture the wiring. If you intend to use speakers wall mounted, you might be able to run the wire through a hole in the wall and down the wall cavity. For some, this can be an option.
Alternatively, if you’re planning to run wire down through a crawlspace or attic, you may also require the services of an electrician. Assuming you’re free from any regulations preventing you from continuing, simply run the wire down the wall from one location to the other. The hard part will evidently be finding the right wall cavity so plan, plan, plan. If you decide to go the route of installing speaker wire using crown moulding, you’ll need to know how to properly install the moulding which is an art in and of itself. Any of these methods will work to run speaker wire. Ultimately, it’ll come down to your personal preferences and the manner in which your home is built.
Anyone serious about having the best quality surround sound audio experience for their entertainment room, speaker wire is almost a necessity. For high-end speakers, there’s nothing better. You get to customize so much with wire that’s adaptable like this. Buy the length you want, input it wherever it’s got to go, and if you ever need to update or swap some of it out, a little extra’s not far off.
For oxygen-free, copper speaker wire cable in Canada, visit PrimeCables. You can rely on PrimeCables’ speaker wires for the utmost transmission of high quality audio signals day-in and day-out.
One thought on “How to Run Speaker Wires for Home Theater Speakers”
I really appreciated ur way of handling and teaching of subjects generally especially electrical issues.Sir,I will like you to explain how to run wire for speakers in conduits form